Stainless steel cold rolled coil and hot rolled coil which is better?

September 28, 2022

Specification and Size of Stainless Steel, Stainless Steel Plate Contains Rolls and Original Flat Rolls:

1, the volume is divided into cold rolled and hot rolled coils, trimming and burrs

2. The thickness of cold rolled coil is generally 0.3-3mm, and also has 4-6mm thickness cold-rolled plate, width 1m, 1219m, 1.5m, represented by 2B.

3, the thickness of hot rolled coil is generally 3-14mm, there are also 16mm rolls, width 1250, 1500, 1800, 2000, with NO.1 said

4, the width of 1.5m, 1.8m, 2.0 meters for the trimming roll

5, the width of the burrs is generally 1520,1530,1550,2200, etc. wider than the normal width.

6, in the price of the same type of cut edge roll and burrs are generally a difference of 300-500 yuan.

7, the volume can be determined according to the length of the customer's request, after Kaiping Kaiping flat open. Cold rolling general Kaiping 1m*2m, 1219*2438 also called 4*8 feet, hot rolling general Kaiping 1.5m*6m, 1.8m*6m, 2m*6m, according to these dimensions open called the target plate or plate.

Original plate, also known as sheet rolling:

1, the original plate thickness is generally between 4mm-80mm, there are also 100mm and 120mm, this thickness can be set rolling.

2, the width of 1.5m, 1.8m, 2m, length of 6 meters or more.
3, features: original flat plate large size, high cost, pickling difficult, not easy to transport.

お問い合わせ

Author:

Mr. Li Lee

Eメール:

sales02@rizhaoxinsteel.com

Phone/WhatsApp:

+86 13468368183